Cast Steel Globe Valve

DESCRIPTION:  Hebei Metals supplies Cast Steel Globe Valves.  The "cast steel" refers to the material specification of valve body and bonnet   of the globe valve. Our casting covers a wide range of carbon stee, stainless   steel, alloy steel and aluminium bronze, etc.

Specification of Cast Steel Globe Valve:

1. Brief Introduction:

    The globe valve is a closing-down valve in which the closure member(often called disc) is moved

    squarely on and off the seat. By this mode of disc tavel, the seat opening varies in direct proportion

    to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally

    suited for duties involving regulation of flow rate.

2. Material Specification:

    Body & Bonnet : WCB, LCB, WC1, WC9, C5, C12, CF8, CF8M, CF3, CF3M, Aluminium Bronze

    Seat Ring: A105, LF2, F304, F316, F304L, F316L, F51, Aluminium Bronze

    Disc: A105, LF2, WC1, WC9, CF8, CF8M, CF3, CF3M, Aluminium Bronze

    Stem & Gland: F6, F304, F316, F51, F304L, F316L;   Bolts & Nus: B7/2H B8M/8M

    Handwheel: Cast Iron, Carbon Steel, Stainless Steel

3. Size and Pressure Ratings:

    2" ~ 36" (DN15 ~ DN900);  150LB ~ 2500LB

4. Standards:

    BS1873, ASME B16.34, ASME B16.5, ASME B16.47, ASME B16.25, ASME B16.10, MSS SP25

5. Construction Structure:

    Full Port/Reduced Port, Bolted Bonnet/Pressure Seal Bonnet, Flexible/Solid Disc

    Renewable Seat Ring/Fixed Seat Ring, Rising Stem/Non-Rising Stem, Outside Screw & Yoke(O.S&Y)